Air Balancer (with lift control module)*1
Perform lifting operation using a lift control module. You can manually move a suspended load over an approx. 35 cm range from the stop position. With the floating feature, the load returns to the stop position when released. *2
The wire rope can be replaced with a load chain.*3
*1. Kensui has no lift control module.
*2. Kensui has no floating feature.
*3. A load chain is not available in the type MSD, Kensui, and models with a hoisting capacity of more than 140 kg.
Hoisting capacity 270kg Type MS
- Speed control is available using the speed adjustment screw of the pendant switch.
This type is equipped with the floating feature
Hoisting capacity 270kg Type MS-A
- Speed control is available using the speed adjustment screw of the lift control module.
- This type is equipped with a fall-arrest device.
- The device prevents the load from dropping even if the air supply is shut off or the pendant switch hose breaks.
- Two types of controller are available: pendant type and grip type.
Hoisting capacity 140kg Type MS-ATC
- This type is equipped with a pendant type for hand operation.
- The up and down buttons and handle are mounted on the lower hook of the type MS-A.
- While ensuring the stability of a suspended load, the balancer provides better controllability compared to the standard pendant type.
- The same speed adjustment is available as the type MS-A.
- This type is equipped with a fall-arrest device.
Hoisting capacity 90kg Type MSD
Speed control is available using the speed adjustment screw of the lift control module.
The built-in brake system eliminates inertial movement of the wire after stopping, and therefore, it can prevent swinging of the load (inertial motion prevention device).
- Speed control is available using the speed adjustment screw of the lift control module.
- The built-in brake system eliminates inertial movement of the wire after stopping, and therefore, it can prevent swinging of the load (inertial motion prevention device).
Hoisting capacity 70kg Kensui
- The center of gravity of the main body is designed to be low and it moves near the load.
- Lift-up/down and speed adjustment are combined and can be operated with a single lever.
- You can lift a load without delay. This convenience facilitates smooth assembly line operation.
Notes:
*1. The floating feature is not available.
*2. Kensui is a product of Toyotsu Techno Corporation.