Screw Feeders
Automatic Screw Feeder (Manual)
Increase productivity with fast and reliable screw feeding.
- Between 1.0~5,0mm (lncl,: 1.0mm, 1.2mm, 1.4mm, 1.7mm, 2.0mm, 2.3mm, 2.6mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm) 11 sizes.
- Screw Length: Up to 18mm (under screw head)
- Capacity of hopper: 200~220 cc
- Screw Length≧Thread Diameter (1=1, 1 < 1)
- Thickness of screw head≧0.2mm
- No jamming or failure occurred with these applicable types and affect productivity.
- Feeding rail can be pulled out for width adjusts to the applied sizes easily. Measurements for width adjusting can be in metric or imperial units.
- RG-SFH515 allows adjusting the width of feeding rail to serve 11 sizes screws, between 1.0mm to 5.0mm diameter. The flexibility prevents dealers from stocking up on quantities for different sizes and reduces the cost on related accessories for users.
- With vibration in small amplitude at high strength, it moves screws on rail to pick-up point in good order, no overlay or jamming to affect the speed of movement and productivity.
- Individual drive system for feeding and vibrating operation.
- Setting for suitable stop time without interrupt to operate.
- Equipped ground wire, socket & buzzer for operative safety and alarm signal.
- PCB controls for efficiencies of desired speed & timing on each operating step.
- Switching Adaptor allowed AC 100~240V power source for stable DC 15V output. No influences and problems due to the different AC power source of factories locations.